Surface Treatment


Accurate Edge has its own in house blasting facility with a Blast cabinet for small parts up to 1 mtr long and a Blast Room for parts up to 3 mtrs x 2.4 mts x 2.4 mtrs. This enables Accurate to blast a wide variety of parts with different media.

Abrasive blasting gives you the ability to combine surface cleaning and finishing into one cost-effective process. With abrasive blasting, high pressure is used to propel a stream of abrasive media against a surface to remove contaminants and alter the shape or texture. A wide range of materials can serve as the abrasive blast media, including glass, plastic, aluminum oxide and many others. Typically aluminium oxide 120 mesh or 220 mesh is used to great a fine anchor pattern prior to coating to improve adhesion. Accurate Edge is your source for the best abrasive blasting for metal surfaces and fine finishing.

Abrasive blasting offers the flexibility to tailor the process to meet your specific cleaning and finishing requirements. By altering factors such as the type of media, the size of the media particles, the velocity of the blast stream, the angle the stream is delivered by the blast gun, and the distance from the surface when delivering the blast, the user has complete control over the process and the results it delivers. Accurate Edge can achieve anchor patterns as low as 5 to 10 micron.


Industries Being Served


Jebel Ali Free Zone
P O BOX: 261085,

United Arab Emirates

+971 4 8808 063


2705 W Mississippi Ave
Tampa, FL – 33629

+1 813-489-2446


Old Madras Road
P O BOX: 560016

+91 80 25271669

Copyright © 2023 ACCURATE EDGE LLC . All Rights Reserved.|